1. Whats the meaning of this sign?

A. muddy road

B. low-lying road

C. overflowing road

D. ferry

Answer: C

2. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer: A

3. Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer: D

4. What does the traffic light mean?

A. no right turn

B. intersection warning

C. going straight is allowed

D. speed up and pass

Answer: B

5. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

6. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer: A

7. After causing a road accident, the vehicle driver needs to change the scene for rescuing the wounded, the driver should mark the location.

A. Right

B. Wrong

Answer: A

8. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

9. When a vehicle passes a narrow road or bridge, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

10. After a tire blows out and before the driver can control the speed of the vehicle, he should refrain from using the foot brake to stop the vehicle. Otherwise, a horizontal swing of the vehicle can cause greater danger.

A. Right

B. Wrong

Answer: A

11. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

12. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C

13. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

14. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

15. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

16. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer: D

17. This sign warns the driver there have traffic lights ahead.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of this sign?

A. lane for both going straight and U turn

B. lane for both going straight and left turn

C. lane for going straight and right turn

D. lanes for going in different directions

Answer: B

19. What kind of behavior of this driver violates the law?

A. not hold the steering wheel according to regulation

B. angle of the seat is not correct

C. not buckled up

D. the driving posture is incorrect

Answer: C

20. Whats the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

查看2025年英文版科目一最新完整版题库

驾考英文试题: 和田驾考英文 吉安英文版驾校考试科目一 陕西考驾驶证英语试题 茂名科目一模拟考试英语版 嘉兴驾考英文
其他外语题库: 中国驾照考试英语科目一题库 中国驾照考试英语科目四题库 中国驾照考试德语科目一题库 中国驾照考试法语科目一题库 中国驾照考试西班牙语科目一题库 中国驾照考试日语科目一题库 中国驾照考试韩语科目一题库 中国驾照考试俄语科目一题库 中国驾照考试阿拉伯语科目一题库 中国摩托车驾照考试英文题库