1. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B

2. Whats the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer: C

3. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

5. When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.

A. Right

B. Wrong

Answer: A

6. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer: B

7. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

8. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer: A

9. When driving, the driver should be courteous and defensive, instead of being offensive.

A. Right

B. Wrong

Answer: A

10. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he can avoid rear-end collision.

A. Right

B. Wrong

Answer: B

11. This sign reminds there is a ferry ahead for vehicles.

A. Right

B. Wrong

Answer: A

12. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer: B

13. A motorized vehicle is not allowed to stop in the section within

A. 5m

B. 10m

C. 50m

D. 30m

Answer: C

14. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

15. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer: B

16. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer: B

17. Whats the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer: C

18. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer: D

19. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

20. May not drive if _____

A. the window is not closed

B. the door is not closed

C. the audio device is not closed

D. the roof window is not closed

Answer: B

查看2025年英文版科目一最新完整版题库

驾考英文试题: 长春科目一模拟考试英语版 晋中2025考驾照英语题库 黄山中国驾照英文版 南通英文驾照题库 毕节科目一考试英语
其他外语题库: 中国驾照考试英语科目一题库 中国驾照考试英语科目四题库 中国驾照考试德语科目一题库 中国驾照考试法语科目一题库 中国驾照考试西班牙语科目一题库 中国驾照考试日语科目一题库 中国驾照考试韩语科目一题库 中国驾照考试俄语科目一题库 中国驾照考试阿拉伯语科目一题库 中国摩托车驾照考试英文题库